Create a new configuration for an RTU

Upload the current configuration from an RTU

Define the identification characteristics of the RTU

Add points for Discrete I/O acquisition boards, as well as polled serial protocols

Modify alarm point parameters, such as description, severity, CLLI

Set the time and date

Enable features, such as InSite and the LCD Display

Configure
o IP networking parameters
o Modem numbers and PPP addresses
o Port settings and associated devices (i.e. WS-ARM/1 Analog Remote, TBOS, etc)

Setup alarm point correlations to activate output relays, or issue an alphanumeric page, based on an input alarm point

Download a new configuration to the WS3500

Upgrade the Firmware

Backup and Restore to local files on the PC

View configuration activity log

Metago Manager LITE is included with each WS3500 at no charge.